XENOY™ 1760E Resin. an improved Version of XENOY™ 1760 with High Flow

11% Glass Reinforced Filled PC+PBT. improved Impact Strength Retention

XENOY™ 1760E PC/PBT Resin is developed as an enhanced Evolution of the Established XENOY™ 1760 Grade, offering improved Processing Efficiency while preserving the Mechanical reliability required in demanding Automotive applications. It is engineered to deliver Better Manufacturability without Compromising Structural performance.

The material incorporates 11% Glass Fiber Reinforcement, maintaining a Solid balance between Stiffness and Toughness. This Reinforcement support Dimensional Stability and Load Bearing capability, ensuring that Parts retain their Shape and performance under Mechanical Stress.

XENOY™ 1760E PC/PBT Resin Introduces Higher Flow characteristics, enabling easier Mold Filling and improved Replication of Complex Geometries. This Enhancement allows manufacturers to achieve Faster Cycle Times and more consistent Part Quality, particularly in High Volume production Environments.

Beyond Processing Improvements, the Resin maintains Strong Impact Strength and Durability, ensuring Resistance to Mechanical Stress during use. the PC/PBT Alloy Structure also contributes Good Chemical Resistance, allowing components to withstand exposure to Automotive Fluids and Environmental Contaminants.

XENOY™ 1760E PC/PBT Resin is designed with flexibility in Mind for Painted and Non Painted Automotive Exterior applications. It support reliable Surface performance, enabling consistent Finishing results while maintaining Structural Integrity Underneath.

Advance XENOY™ 1760E PC/PBT Resin is Ideal for Automotive Exterior Panels, Trim Parts, Housings, and Structural components, where improved Processing Flow, Impact Resistance, and Chemical Durability must be Delivered Together.

XENOY™ 1760E PC/PBT Resin is RoHS Compliant, supporting Responsible material selection while delivering enhanced Manufacturability and reliable performance.

Notes:

XENOY™ 1760E PC/PBT Resin
11% Glass Reinforced
High Flow
Improved Impact Strength Retention
RoHS Compliant

XENOY 1760E PC/PBT has 0.40 ~ 0.60 Shrinkage, flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 125

Vicat Softening Temperature Rate

SABIC XENOY™ 1760E Vicat Softening Temperature Rate , B120 = 130

Material MFI / Melt Flow Rate

Melt flow Rate, 250°C/5.0 kgf = 15

Material Melt Volume Rate, MVR

Melt Volume Rate, 265°C/5.0 kgf = 27

Material Flexural Modulus

XENOY™ 1760E Flexural Modulus, ISO 178, 2 mm/min = 4010 Mpa

XENOY™ 1760E are Non UL94 Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.