BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
XENOY™ 6620U PC/PBT Resin. Unique Chemical Resistance Fuel System
Impact Modified Grade for High Safety Environment. added UV Stabilizer
XENOY™ 6620U PC/PBT Resin is engineered for Safety critical Automotive applications where Materials must perform Reliably under demanding Chemical and Environmental Exposures. It is specifically designed to support Systems where Failure is not acceptable, particularly in components Associated with Fuel Handling and Safety Structures.
The PC/PBT Alloy provides a Strong foundation of Mechanical Durability and Resistance to Aggressive Automotive Media, enabling the material to withstand prolonged exposure to Fuels, Oils, and Chemical Agents. This ensures that Structural Integrity is maintained even in Chemically Active Environments.
XENOY™ 6620U PC/PBT Resin is formulated with a specialized Focus on Fuel System Compatibility, delivering enhanced Chemical Resistance Tailored for components in Contact with Fuel and Related Substances. This makes it suitable for applications where Long Term exposure to Hydrocarbons could Degrade Conventional Materials.
The material incorporates an Advanced Impact Modified Structure, allowing components to absorb Mechanical Energy Effectively. This is particularly important in Automotive Safety Systems, where Materials must maintain Integrity during sudden Impact Events or Stress Conditions.
XENOY™ 6620U PC/PBT Resin also includes UV Stabilization, ensuring performance Retention in Outdoor or exposed Environments. This contributes to maintaining both Mechanical Properties and Surface Quality over extended Service Lifetimes.
In addition, the Resin offers Wide Temperature Ductility, maintaining flexibility and Toughness in both Low and elevated Temperature Environments. This ensures that Safety Related components perform Consistently regardless of Operating Conditions.
XENOY™ 6620U PC/PBT Resin support reliable manufacturing with stable Flow behaviour, enabling consistent Molding of Complex and Precision components required in Automotive Systems.
The material achieves UL94 HB Classification from 1.50 mm to 3.00 mm, focusing on Mechanical Durability and Chemical Resistance rather than Flame Retardant Specialization.
XENOY™ 6620U PC/PBT Resin is ideally suited for Automotive Fuel System components, Safety Housings, Connectors, and Structural Parts, where Chemical Resistance, Impact Durability, and Environmental reliability must Work Together in High performance applications.
XENOY™ 6620U PC/PBT Resin is RoHS Compliant, supporting Responsible material selection while delivering Dependable performance in Safety critical Automotive Environments.
Notes:
XENOY™ 6620U PC/PBT Resin
Unique Chemical Resistance Fuel System
Impact Modified Grade
added UV Stabilizer
UL94 Rated
RoHS Compliant
XENOY 6620U PC/PBT has 1.6 ~ 1.8 Shrinkage, flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
6.4 mm, unannealed 60
Vicat Softening Temperature Rate
SABIC XENOY™ 6620U Vicat Softening Temperature Rate , B120 = 121
Material MFI / Melt Flow Rate
Melt flow Rate, 266°C/5.0 kgf = 21.9
Material Melt Volume Rate, MVR
Melt Volume Rate, 265°C/5.0 kgf = 17
Material Flexural Modulus
XENOY™ 6620U Flexural Modulus, ISO 178, 2 mm/min = 1690 Mpa
XENOY™ 6620U are UL94 - HB, 1.50 mm ~ 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.