XENOY™ CL100S Resin. General Purpose PC/PBT for Wide Applications

For Unpainted Exterior Automotive Parts with Added Improved Release

XENOY™ CL100S PC/PBT Resin is an Automotive Grade with Good Impact Strength & Chemical Resistance to Occasional Solvent or Gasoline Contact

Added Mold Release & UV Stabilizer

XENOY™ CL100S PC/PBT Resin is Best for Unpainted Exterior Automotive Parts

It is from the Family of XENOY™, a Blend of Plastic consisting of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages

Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low-Temperature Ductility
Polyethylene Terephthalate is Crystalline with Better Chemical Resistance & Superior Flow
Polybutylene Terephthalate offers better Impact Strength & Solvent Resistance

As a Blend XENOY™ Blend Resin, offers

- Toughness - Excellent Mechanical & Electrical Properties, Balanced Impact with Flow,
- Excellent Ductility over Temperature Range. The impact is Maintained Down to -40°C
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Long Term Properties with Excellent UV Stability
- Weatherability with UV Stabilizer
- Lubricity Smooth Part on Part for Demanding Applications
- Good Temperature Performance Sufficient for Paint Cure up to 130° C

XENOY CL100S PC/PBT has 0.70 ~ 1.00 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/A

Vicat Softening Temperature Rate

SABIC XENOY™ CL100S Vicat Softening Temperature Rate , B120 = 127

Material MFI / Melt Flow Rate

N/A

Material Melt Volume Rate, MVR

Melt Volume Rate, 250°C/5.0 kgf = 20

Material Flexural Modulus

XENOY™ CL100S Flexural Modulus, ISO 178, 2 mm/min = 2200 Mpa

XENOY™ CL100S are UL94 - HB, 1.50 mm ~ 3.00 mm Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.