XENOY™ ENG2901RC PC/PBT Compound with 40% PCR Compound from LNP

Non-Chlorinated, Non-Brominated FR & Excellent Chemical Resistance

XENOY™ ENG2901RC PC/PBT Resin is a 40% Post Consumer Recycled Compound from LNP

It offers Non-Chlorinated, Non-Brominated Flame Retardant, Good Flow, and Excellent Chemical Resistance

XENOY™ ENG2901RC PC/PBT Applications include Automotive Electronics or E&E Housing Applications

It is from the Family of XENOY™ HTX, a Blend of Plastic consisting of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages.

It comes with or without Glass Filled Reinforced

Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low-Temperature Ductility
Polyethylene Terephthalate is Crystalline with Better Chemical Resistance & Superior Flow
Polybutylene Terephthalate offers better Impact Strength & Solvent Resistance

As a Blend XENOY™ Blend Resin, offers

- Improved Toughness - Excellent Mechanical Strength. Able to Absorb Significant Energy and Withstand Plastic Deformation in the Event of a Crash.
- Excellent Low Temperature Ductility and High Elongation
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Weatherability with UV Stabilizer
- Improved Good Temperature Performance Sufficient for E-Coating, 200° C Baking

XENOY ENG2901RC PC/PBT has 0.5 ~ 0.8 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 77

Vicat Softening Temperature Rate

SABIC XENOY™ ENG2901RC Vicat Softening Temperature rate , B50 = 101

Material MFI / Melt Flow Rate

Melt Flow Rate, 266°C/5.0 kgf = 30

Material Melt Volume Rate, MVR

N/A

Material Flexural Modulus

XENOY™ ENG2901RC Flexural Modulus, ASTM D790, 1.3 mm/min = 2400 Mpa

XENOY™ ENG2901RC are UL94 - V0, 1.50 mm ~ 1.65 mm Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.