BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 88 874 7437
Malaysia Office : +6012 283 6969
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 988 439 6812
XENOY™ HTX975 PBT Resin. 35% Glass Reinforced High Heat Formulation
Improved Toughness Version for Safety Features in Automotive Parts
XENOY™ HTX975 PBT/PET Resin is a 35% High Strength Glass Fiber Reinforced PBT
It offers Excellent Heat Resistance, Best Strength & Stiffness. Excellent Improved version vs XENOY™ HTX575
XENOY™ HTX975 PBT/PET Applications include Injection Molded Parts that Need to Endure E-coating and Subsequent Baking Processes up to about 200° Celsius
It is from the Family of XENOY™ HTX, a Blend of Plastic consisting of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages.
It come with or without Glass Filled Reinforced
Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low-Temperature Ductility
Polyethylene Terephthalate is Crystalline with Better Chemical Resistance & Superior Flow
Polybutylene Terephthalate offers better Impact Strength & Solvent Resistance
As a Blend XENOY™ Blend Resin, offers
- Improved Toughness - Excellent Mechanical Strength. Able to Absorb Significant Energy and Withstand Plastic Deformation in the Event of a Crash.
- Excellent Low Temperature Ductility and High Elongation
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Weatherability with UV Stabilizer
- Improved Good Temperature Performance Sufficient for E-Coating, 200° C Baking
XENOY HTX975 PBT/PET has 0.40 ~ 0.60 Shrinkage, Flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
N/A
Vicat Softening Temperature Rate
SABIC XENOY™ HTX975 Vicat Softening Temperature rate , B50 = 235
Material MFI / Melt Flow Rate
N/A
Material Melt Volume Rate, MVR
Melt Volume Rate, 265°C/5.0 kgf = 33
Material Flexural Modulus
XENOY™ HTX975 Flexural Modulus, ISO 178, 2 mm/min = 10450 Mpa
XENOY™ HTX975 are Non UL94 Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.