BRINGING THE RIGHT MATERIAL & BEST SERVICES IN SOUTH EAST ASIA
Thailand Office : +66 64 586 6450
Malaysia Office : +60 12 956 4808
Indonesia Office : +62 818 0402 0119
Vietnam Office : +84 934 036 679
Philippines Office : +63 917 567 4188
India Office : +91 961 999 5685
XENOY™ HX5600HP PBT Resin. Bio Compatible (ISO 10993 or USP Class VI)
EtO, Gamma and Steam Sterilizable. Healthcare Chemical Resistance
XENOY™ HX5600HP PBT Resin is engineered for Healthcare and Laboratory Environments where materials must remain stable through repeated Sterilization Cycles and continuous Chemical exposure. It is designed to support Medical Devices and components that require both Durability and Compliance with Biocompatibility Standards.
The material meets Biocompatibility Requirements under ISO 10993 and USP Class VI, ensuring it is suitable for applications Involving Direct or Indirect Contact within controlled Healthcare Environments. This Compliance enables its use in regulated Medical Systems where Safety and material Consistency are Essential.
XENOY™ HX5600HP PBT Resin is specifically Formulated to withstand multiple Sterilization Methods, including Ethylene Oxide (EtO), Gamma Radiation, and Steam Sterilization. This allows components to maintain Mechanical Integrity and Dimensional Stability even after repeated Processing Cycles, which is critical for Reusable or Sterilized Medical Devices.
A key performance advantage lies in its enhanced Resistance to Aggressive Disinfectants and Cleaning Agents, commonly used in Hospitals and Laboratory Settings. This ensures that the material retains Strength and Surface Quality when exposed to Alcohols, Peroxides, and Other Chemical Sanitizers.
XENOY™ HX5600HP PBT Resin also delivers a balanced Property Profile, Combining Good Flow characteristics, Impact Strength, and Chemical Durability. This support reliable Molding of Precision Parts while maintaining consistent performance in demanding Environments.
The Resin demonstrates stable behaviour across a range of Temperatures, maintaining Toughness and Resisting degradation during both use and Sterilization. This reliability ensures Long Term performance in critical Healthcare applications.
XENOY™ HX5600HP PBT Resin is well suited for Medical Housings, Laboratory Equipment components, Diagnostic Devices, and Healthcare System Parts, where Sterilization Resistance, Chemical Durability, and Regulatory Compliance must be achieved together.
The material achieves UL94 HB Classification from 1.50 mm to 3.00 mm, providing baseline Flame performance while Prioritizing Healthcare Durability and Stability.
XENOY™ HX5600HP PBT Resin is RoHS Compliant, supporting Environmentally Responsible material selection while delivering reliable performance in Healthcare and Sterilization Intensive Environments.
Notes :
XENOY™ HX5600HP PBT Resin
Bio Compatible (ISO 10993 or USP Class VI)
EtO, Gamma and Steam Sterilizable
Healthcare Chemical Resistance
UL94 Rated
RoHS Compliant
XENOY HX5600HP PBT has 0.7 ~ 1.1 Shrinkage, flow, 3.2 mm. %
Material HDT, 1.82 MPa, ASTM A648, °C
3.2 mm, unannealed 80
Vicat Softening Temperature Rate
SABIC XENOY™ HX5600HP Vicat Softening Temperature rate , B50 = 123
Material MFI / Melt Flow Rate
Melt flow Rate, 250°C/5.0 kgf = 11
Material Melt Volume Rate, MVR
Melt Volume Rate, 250°C/5.0 kgf = 10
Material Flexural Modulus
XENOY™ HX5600HP Flexural Modulus, ISO 178, 2 mm/min = 2050 Mpa
XENOY™ HX5600HP are UL94 - HB, 1.50 mm ~ 3.00 mm Rated
Disclaimer
Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021
SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.