XENOY™ HX6600HP. High Flow, Bio Compatible (ISO 10993 or USP Class VI)

EtO, Gamma and Steam Sterilizable. Healthcare Chemical Resistance

XENOY™ HX6600HP PBT Resin is a Balance Grade with Improved Flow, Good Impact Strength

The Resin offers Improved Chemical Resistance against Chemical Disinfectants in Lab or Healthcare Industries

XENOY™ HX6600HP PBT Resin is Categories under Healthcare Management of Change, Bio-Compatible (ISO10993 or USP Class VI). EtO, Gamma and Steam sterilizable.

It is from the Family of XENOY™, a Blend of Plastic consisting of either Polybutylene Terephthalate with Polycarbonate or Acrylonitrile Butadiene Styrene or Polyethylene Terephthalate Blend Formulation. A Unique Blend with Either Material Characteristic Advantages

Polycarbonate Resin offers High Heat Resistance, Excellent Ductility at Ambient Temperatures
Acrylonitrile Butadiene Styrene Resin offers Superior Processing, High Gloss, Low-Temperature Ductility
Polyethylene Terephthalate is Crystalline with Better Chemical Resistance & Superior Flow
Polybutylene Terephthalate offers better Impact Strength & Solvent Resistance

As a Blend XENOY™ Blend Resin, offers

- Toughness - Excellent Mechanical & Electrical Properties, Balanced Impact with Flow,
- Excellent Ductility over Temperature Range. The impact is Maintained Down to -40°C
- Balance - Outstanding Process-ability, Good Impact with Flow & Color Freedom
- Stability - Dimensional Stability, Predictable Thermal Stability, Good Chemical Resistance
- Long Term Properties with Excellent UV Stability
- Weatherability with UV Stabilizer
- Lubricity Smooth Part on Part for Demanding Applications
- Good Temperature Performance Sufficient for Paint Cure up to 130°C

XENOY HX6600HP PBT has 1.2 ~ 1.6 Shrinkage, Flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 60

Vicat Softening Temperature Rate

SABIC XENOY™ HX6600HP Vicat Softening Temperature rate , B50 = 120

Material MFI / Melt Flow Rate

Melt Flow Rate, 250°C/5.0 kgf = 11

Material Melt Volume Rate, MVR

Melt Volume Rate, 250°C/5.0 kgf = 10

Material Flexural Modulus

XENOY™ HX6600HP Flexural Modulus, ISO 178, 2 mm/min = 1800 Mpa

XENOY™ HX6600HP are UL94 - HB, 1.50 mm ~ 3.00 mm Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.