XENOY™ T2NX5230 is 29% Post-Industrial Recycled Plastics PC/PET Blend

It also contain 16% Mineral Filled with Various improved performance

XENOY™ T2NX5230 PC/PET Resin is engineered for applications where Dimensional Precision and Thermal Stability are essential, particularly in Exterior Automotive components exposed to varying Environmental Conditions. It is designed to deliver consistent Geometry under Temperature Changes while supporting Modern Lightweight and Sustainable Design Strategies.

The Formulation integrates 29% Post Industrial Recycled PET, aligning with SABIC’s TRUCIRCLE™ Portfolio for Circular material Development. This enables Measurable Sustainability benefits while maintaining the Structural Integrity required for Engineering applications.

XENOY™ T2NX5230 PC/PET Resin incorporates 16% Mineral Reinforcement, which enhances Stiffness and Significantly lowers the Coefficient of Linear Thermal Expansion (CLTE). This allows Parts to maintain Tighter Tolerances and improved Fit, especially for Large or Flat Exterior components such as Roof Spoilers and Trim Panels.

Compared to Non Reinforced Alternatives, this Grade provides greater Dimensional Stability and reduced Shrinkage, ensuring that Parts maintain their Intended Geometry throughout Processing and Service Life. This makes it particularly valuable for applications where alignment and Visual Continuity are critical.

XENOY™ T2NX5230 PC/PET Resin also offers High Heat Resistance and stable Mechanical performance, allowing components to withstand Temperature Fluctuations without Distortion. Its balanced Flow behaviour support efficient Molding, enabling High Throughput and consistent production Quality.

The material is optimized for Automotive Exterior applications, delivering a combination of Stiffness, Thermal Control, and Sustainability. Its performance Profile allows it to function as a Structural Enhancement in Parts where reduced Expansion and improved Rigidity are required.

XENOY™ T2NX5230 PC/PET Resin is ideally suited for Roof Spoilers, Exterior Trims, Automotive Panels, and Structural components, where Low CLTE, High Stiffness, and consistent Geometry must be maintained across Temperature Variations.

Furthermore, XENOY™ T2NX5230 PC/PET Resin is RoHS Compliant, supporting Responsible material selection while delivering precise Dimensional Control and performance Driven Sustainability.

Notes :

XENOY™ T2NX5230 PC/PET Resin
SABIC’s TRUCIRCLE™ Portfolio
29% Post Industrial Recycled Plastics
16% Mineral Filled
RoHS Compliant

XENOY T2NX5230 PC/PET has 0.50 ~ 0.70 Shrinkage, flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

SABIC XENOY™ T2NX5230 Vicat Softening Temperature rate , B50 = 140

Material MFI / Melt Flow Rate

Melt flow Rate, 265°C/5.0 kgf = 28

Material Melt Volume Rate, MVR

Melt Volume Rate, 265°C/5.0 kgf = 24

Material Flexural Modulus

XENOY™ T2NX5230 Flexural Modulus, ISO 178, 2 mm/min = 3750 Mpa

XENOY™ T2NX5230 are Non UL94 Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.