XENOY™ X2500UV Resin. Good Impact Strength, UV Stabilizer & High Heat

Creep Resistance, Good Surface Finish & High Heat, Up 10° C to 15° C

XENOY™ X2500UV PC/PET Resin is engineered for applications where Long Term Mechanical Stability under Load and elevated Temperature conditions is critical. It is designed to maintain Structural Integrity over time, particularly in environments where continuous Stress and Heat could Cause deformation in conventional Materials.

The PC/PET Alloy Structure provides a balanced combination of Impact Strength, Dimensional Stability, and Chemical Durability, enabling components to perform reliably across both Static and Dynamic Loading Conditions. This ensures consistent Mechanical behaviour throughout the Service Life of the Part.

XENOY™ X2500UV PC/PET Resin delivers enhanced Heat Resistance, performing approximately 10°C –15°C Higher than General Purpose XENOY™ Grades. This extended Thermal capability allows components to operate more reliably in elevated Temperature Environments without Loss of Structural performance.

A key advantage of this Grade is its Creep Resistance, which enables Parts to retain Shape and Mechanical Strength under continuous Load over time. This makes it particularly suitable for applications where Long Term Dimensional Stability is Essential, such as Mounted or Load Bearing components.

XENOY™ X2500UV PC/PET Resin is also formulated with UV Stabilization, ensuring Durability and Resistance to degradation when exposed to Outdoor Conditions. This helps preserve both Mechanical Properties and Surface Quality throughout extended Environmental exposure.

The material offers Medium Viscosity with stable Flow behaviour, enabling efficient Molding and consistent reproduction of Part Geometry. Its balanced Processability support reliable manufacturing performance across a Wide range of applications.

XENOY™ X2500UV PC/PET Resin achieves UL94 HB Classification from 0.75 mm to 3.00 mm, providing baseline Flame performance while prioritizing Long Term Mechanical Stability and Thermal Endurance.

The XENOY™ X2500UV PC/PET Resin is ideally suited for Automotive Exterior components, Structural Housings, Mounted Assemblies, and Outdoor applications, where Creep Resistance, Heat performance, and UV Durability must be achieved together.

XENOY™ X2500UV PC/PET Resin is RoHS Compliant, supporting Responsible material selection while delivering extended Thermal capability and Long Term Load Stability.

Notes :

XENOY™ X2500UV PC/PET Resin
Impact Strength with Creep Resistance
UV Stabilizer
High Heat
RoHS Compliant

XENOY X2500UV PC/PET has 0.50 ~ 0.80 Shrinkage, flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 108

Vicat Softening Temperature Rate

SABIC XENOY™ X2500UV Vicat Softening Temperature rate , B50 = 136

Material MFI / Melt Flow Rate

Melt flow Rate, 265°C/2.16 kgf = 9

Material Melt Volume Rate, MVR

Melt Volume Rate, 265°C/1.2 kgf = 4

Material Flexural Modulus

XENOY™ X2500UV Flexural Modulus, ISO 178, 2 mm/min = 2150 Mpa

XENOY™ X2500UV are UL94 - HB, 0.75 mm ~ 3.00 mm Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.