XENOY™ X5630P PC/PET Blend Resin. Mineral Filled and High Heat

Paint applications, Low CTE, Low Shrinkage & Good Dimension Stability

XENOY™ X5630P PC/PET Resin is engineered for Automotive Exterior Parts that must retain Dimensional Accuracy and Surface Quality during and after Paint Processing. It is designed to ensure that Coated components maintain alignment, Fit, and appearance throughout manufacturing and Service Conditions.

The formulation utilizes a Mineral Filled PC/PET Structure, providing enhanced Stiffness and improved Thermal Control. This allows components to maintain Geometry during Molding and Subsequent Paint Curing Cycles, where elevated Temperatures can otherwise Induce Distortion.

XENOY™ X5630P PC/PET Resin delivers a Low Coefficient of Thermal Expansion (CTE), reducing Dimensional Changes under Heat exposure. This ensures that Painted Panels and Trims remain Stable, preventing Defects such as Warpage, Surface Waviness, or Mismatch with Adjoining Parts.

The material also demonstrates Low Shrinkage behaviour, enabling consistent Part Dimensions directly after Molding. This contributes to improved Assembly Accuracy and reduces the need for Post Processing Correction in Precision applications.

XENOY™ X5630P PC/PET Resin offers High Heat Resistance, allowing it to withstand the Thermal Demands of Automotive Paint Systems while maintaining Mechanical Integrity. This support reliable performance during both manufacturing and Long Term use.

In addition, the Resin maintains Good Impact Strength and Chemical Resistance, ensuring Durability in Outdoor Environments and Resistance to Automotive Fluids and Contaminants.

XENOY™ X5630P PC/PET Resin is not UL94 Rated, as it is optimized for Paint System Stability, Thermal performance, and Dimensional Precision, rather than Flame Retardant Functionality.

Furthermore, XENOY™ X5630P PC/PET Resin is Ideal for Automotive Body Panels, Exterior Trims, Housings, and Painted Structural components, where Low CTE, High Heat Resistance, and consistent Surface appearance are Essential.

XENOY™ X5630P PC/PET Resin is RoHS Compliant, supporting Responsible material selection while delivering Precision performance in Painted Automotive applications.

Notes :

XENOY™  X5630P PC/PET Resin
Mineral Filled
Low CTE and Low Shrinkage
RoHS Compliant

XENOY X5630P PC/PET has - Shrinkage, flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

SABIC XENOY™ X5630P Vicat Softening Temperature rate , B50 = 137

Material MFI / Melt Flow Rate

N/a

Material Melt Volume Rate, MVR

Melt Volume Rate, 265°C/5.0 kgf = 7

Material Flexural Modulus

XENOY™ X5630P Flexural Modulus, ISO 178, 2 mm/min = 4050 Mpa

XENOY™ X5630P are Non UL94 Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.