XENOY™ X6320 Advanced PC/PBT Resin. 10% Mineral Filled Reinforced

Paintable Surfaces or Molded Surface Finish for Automotive Parts

XENOY™ X6320 PC/PBT Resin is a High Performance Engineering Thermoplastic Alloy designed for Automotive Components where Surface Quality, Tactile Feel, and Visual Consistency are Critical Factors in the Final Product Experience. XENOY™ X6320 PC/PBT Resin is specifically developed for Parts such as Door Handles, where both Functional Performance and User Interaction must be carefully balanced.

The formulation of XENOY™ X6320 PC/PBT Resin incorporates 10% Mineral Reinforcement, providing Structural Support while enabling controlled Surface Appearance. This allows Components to maintain Dimensional Stability without compromising Smoothness and Uniformity required for Visible and Touchable Applications, ensuring consistent Aesthetic and Functional Performance.

XENOY™ X6320 PC/PBT Resin enables both Painted Surfaces and Molded in Finishes, allowing flexible Design and Manufacturing Approaches. This Dual Capability allows Components to either receive High Quality Coatings or maintain an As Molded Finish, depending on Application Requirements and Production Strategy.

A key advantage of XENOY™ X6320 PC/PBT Resin is its Refined Surface Finish Performance, minimizing Defects such as Flow Marks and Surface Inconsistencies. This enables Parts to meet High Aesthetic Standards in Automotive Interiors and Exteriors without requiring additional Corrective Processing, improving Production Efficiency and Quality Consistency.

XENOY™ X6320 PC/PBT Resin also provides Good Chemical Resistance and Mechanical Durability, allowing Components to withstand repeated Handling, Environmental Exposure, and Contact with Automotive Fluids. This ensures Long Term Performance and Surface Integrity in Demanding Automotive Environments.

Excellent Flow Characteristics enable XENOY™ X6320 PC/PBT Resin to support efficient Molding and accurate Reproduction of Complex Geometries. This Processing Capability allows Manufacturers to produce Detailed Components while maintaining consistent Quality, Surface Definition, and Dimensional Accuracy.

XENOY™ X6320 PC/PBT Resin is not UL94 Rated, as it is optimized for Surface Quality, Processability, and Mechanical Performance rather than Flame Retardant Applications. The Material Focus remains on delivering High Quality Surface Engineering and reliable Performance for Visible Automotive Parts.

Typical Applications for XENOY™ X6320 PC/PBT Resin include Automotive Door Handles, Trim Components, Housings, and User Interaction Parts where Appearance, Touch Quality, and Durability must be delivered together. XENOY™ X6320 PC/PBT Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection while delivering consistent High Performance Surface and Mechanical Characteristics.

Notes :

XENOY™ X6320 PC+PBT Resin
10% Mineral Filled
For Painted or Molded Door Handles
RoHS Compliant

XENOY X6320 PC/PBT has 0.50 ~ 0.80 Shrinkage, flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

3.2 mm, unannealed 88

Vicat Softening Temperature Rate

SABIC XENOY™ X6320 Vicat Softening Temperature rate , B50 = 139

Material MFI / Melt Flow Rate

Melt flow Rate, 250°C/5.0 kgf = 20

Material Melt Volume Rate, MVR

Melt Volume Rate, 250°C/5.0 kgf = 16

Material Flexural Modulus

XENOY™ X6320 Flexural Modulus, ISO 178, 2 mm/min = 3540 Mpa

XENOY™ X6320 are Non UL94 Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.