XENOY™ XD1647 Advanced PC/PBT Resin. Unique 15% Filled Reinforced

Reduced CTE Combine with Good Chemical Resistance. Paintable Surfaces

XENOY™ XD1647 PC/PBT Resin is a High Performance Engineering Thermoplastic Alloy with 15% Mineral Reinforcement, designed to combine Dimensional Stability with excellent Surface Quality for Paintable Applications. XENOY™ XD1647 PC/PBT Resin integrates Polycarbonate Strength with PBT Chemical Resistance, providing a balanced Performance Profile suitable for demanding Exterior and Industrial Components. The Impact Modified Formulation ensures Durability under Mechanical Stress while maintaining Consistency in Molded Parts.

The PC/PBT Blend Structure in XENOY™ XD1647 PC/PBT Resin focuses on controlling Thermal Expansion while preserving Surface Appearance. The Mineral Reinforcement reduces Coefficient of Thermal Expansion, allowing Components to maintain Dimensional Accuracy across varying Temperature Conditions. This capability makes XENOY™ XD1647 PC/PBT Resin suitable for Applications where Fit, Alignment, and Structural Precision remain Critical Requirements.

XENOY™ XD1647 PC/PBT Resin delivers a combination of reduced Thermal Expansion and enhanced Chemical Resistance, allowing reliable Performance in Environments exposed to Automotive Fluids, Cleaning Agents, and Outdoor Conditions. The Material Formulation enables Molded Parts to retain Structural Integrity and Surface Stability over extended Service Life, even under challenging Operating Conditions.

Surface Characteristics of XENOY™ XD1647 PC/PBT Resin are optimized for Paintability, allowing strong Coating Adhesion and high quality Finishes without extensive Pre Treatment Processes. This capability makes XENOY™ XD1647 PC/PBT Resin suitable for Visible Components where both Mechanical Performance and Aesthetic Quality are equally Important.

XENOY™ XD1647 PC/PBT Resin provides improved Impact Resistance, allowing Components to withstand Physical Stress and Environmental Exposure while maintaining Structural Stability. The Mineral Filled Structure enhances Stiffness while supporting Resistance to Cracking and Deformation. XENOY™ XD1647 PC/PBT Resin is also RoHS Compliant, supporting Environmentally Responsible Material Selection for Global Applications.

From a Design Perspective, XENOY™ XD1647 PC/PBT Resin enables Development of Components requiring both Dimensional Stability and Surface Quality. Typical Applications include Automotive Exterior Parts, Housings, and Industrial Panels where reduced Thermal Movement and strong Surface Finish are Essential Performance Requirements.

XENOY™ XD1647 PC/PBT Resin provides a balanced Material Solution for Applications requiring Paintable Surfaces, Chemical Resistance, and controlled Thermal Expansion. With Mineral Reinforcement, Impact Modification, and Regulatory Compliance, XENOY™ XD1647 PC/PBT Resin supports Modern Engineering Requirements where Performance, Durability, and Appearance must work together.

Notes :

XENOY™ XD1647 Paintable PC + PBT Blend
15% Mineral Reinforced
Enhanced Chemical Resistance.
RoHS Compliant

XENOY XD1647 PC/PBT has 0.60 ~ 0.80 Shrinkage, flow, 3.2 mm. %

Material HDT, 1.82 MPa, ASTM A648, °C

N/a

Vicat Softening Temperature Rate

SABIC XENOY™ XD1647 Vicat Softening Temperature rate , B50 = 128

Material MFI / Melt Flow Rate

N/a

Material Melt Volume Rate, MVR

Melt Volume Rate, 250°C/5.0 kgf = 13

Material Flexural Modulus

XENOY™ XD1647 Flexural Modulus, ISO 178, 2 mm/min = 3450 Mpa

XENOY™ XD1647 are Non UL94 Rated

XENOY Main Page

Disclaimer

Any sale by SABIC, Its Subsidiaries and Affiliates (each a “Seller”), is Made Exclusively under Seller’s Standard Conditions of Sale (available upon request) unless Agreed Otherwise in Writing and Signed on behalf of the Seller. While the Information Contained herein is given in Good Faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Customer must Determine the Suitability of Seller Materials for the Customer’s Particular Use through Appropriate Testing and Analysis. No Statement by Seller Concerning a Possible Use of any Product, Service or Design is Intended, or should be Construed, to grant any License under any Patent or other Intellectual Property Right. © 2021

SABIC Innovative Plastics is a Trademark of SABIC Holding Europe BV * Cycolac, Cycoloy, Lexan, Noryl, Ultem, Valox and Visualfx are Trademarks of SABIC Innovative Plastics IP BV © Copyright 2008 SABIC Innovative Plastics IP BV. All rights reserved.